Skip to content

Message Blocking Is Active – What It Means And How To Fix

Message Blocking Is Active – What It Means And How To Fix

Message Blocking Is Active – What It Means And How To Fix

It means that a person has all text messaging blocked by their carrier and can’t send or receive any text messages. If it is – be certain the person you are texting has their phone settings enabled to send and receive text messages. It could be a general rule, or it could be a punishment.

This just happened to me. My girlfriend texted me and got that message. After falsely assuming I had blocked her and being upset with me, it was her bill being overdue, so they suspended her texting.

Her address changed, and that caused autopay to fail. Reboot your phone, then call your carrier before you assume it’s on the other person’s phone.

You may have message blocking active; check with your carrier and ask if it is possible; if so, ask how to turn off the feature.

What message blocking is active?

When message blocking is active, the recipient does not receive any messages you try to send. You may see “Free Message: Unable to Send Message, Blocking Active” on the screen. 

It can happen for many reasons, but the sender or recipient is usually part of blocked contacts. Besides, T-Mobile users often face this problem. We’ll take a closer look at the causes in the next section. 

Why is message blocking active?

Here is a list of possible reasons why “message blocking is active” you might receive a notification. It is one of the most common reasons for blocking messages, as there are active notifications.

Read More: Would you date a single mother?

It happens when the sender or recipient is part of your blocked contact list. You can verify this by contacting yourself and see if the connection is successful or not. In some cases, it may also turn parental controls on accidentally. 

Shortcode problem

It explains why many T-Mobile users have this problem. To solve this problem, you will need the guidance of experienced technicians. 

Service failure

Again, this is not your fault. You may see the notification message blocking is active due to a time-lapse from your service provider. You can contact the appropriate customer service to see if messaging services have been suspended by mistake.

Surplus of Premium Messages

In this case, you may have selected an option that prevents the phone from receiving or sending premium messages. Even though a few messaging applications only use this feature, it is still an integral prerequisite to be effective. 

Wrong plan

It happens when the subscription you subscribe to does not include messaging services. Please get in touch with customer service to find out if you have selected the right plan or not. Even if your messaging services are on your current plan, you may need more prepaid balance to send the message. 

How to fix message blocking is active?

  • Check Range

Check if the network coverage is adequate. It is usually a pictogram in the top right corner of the phone. If coverage is listed as none, or if you can’t identify the bars, you may not be able to call someone or send and receive text messages. 

  • Check that your phone is active.

Go to the device settings on your phone and check that your phone shows as Active. If you see Suspended or I‘m still moving instead of Active, you may not be able to make calls or send and receive text messages. 

  • Check that messages are included in your plan. 

First, ensure that the Can send/receive text messages option is turned on on your account settings page. If this option is enabled, message blocking is likely an active notification, as text messages are not part of your paid plan. 

  • Check if there is enough space. 

You need at least 15% free space to send a text message. Free up disk space by getting rid of unnecessary applications, unnecessary documents, and old photos. 

  • Check that you are using the correct country code. 

If you are at international borders, you may need help blocking messages just because you entered the wrong country code. You need to do a simple Google search to find out if you are using the correct country code.

  • Try to save the contact again.

If you’ve tried all of the above solutions and the problem persists, it could be related to a specific contact. You may have entered the wrong number by mistake. Delete the contact and re-write the contact with the correct numbers. 

As we mentioned earlier, you may not be able to send the message because your contact has been blocked by someone else or vice versa. So go to your contacts and check the list of blocked contacts. 

Unlock them if they are on the list. Ask the other person to do the same. Call the recipient to see if you have removed them from the block list. 

Block an unknown contact on an Android device:

Go to your Phone Number app and tap on the button that says Advanced Options. Navigate to Call History and tap a call from the number you want to block. After you finish selecting, tap Block / Report Spam. It will successfully add the specific contact to the blocked numbers list. 

Unblocking a number on an Android device: 

Go to your Phone Number app and tap on the button that says Advanced Options. Navigate to Settings and scroll down to Blocked Numbers. You will see an unblock option next to the contact you want to unblock. Tap on it to remove the contact from the block list. 

Block / Unblock a Contact on iPhone: 

Tap on Phone Number Application from your Display or the Application Library. Go to Recent and tap on the Information icon next to the specific contact. Scroll down the screen to find the option that says Block Caller. Tap on this to Block Unknown Contact. You can unblock a contact in the same way. 

  • Enable premium access 

Checking that you’ve got premium access turned on on your phone is pretty straightforward. Head over to Settings and click Application Management. You should see an icon labeled Messenger. Tap on it and navigate to Special Access. It should be possible to Allow premium access. Enable it if not already enabled. 

  • Text content 

There may be times when you encounter the problem of “actively blocking messages” because all non-text elements have been added to your message. In that case, you solve it by sending a plain text message without any images, GIFs, emoticons, or attachments. 

The character limit for all standard messaging services is 160 characters. If this character limit is exceeded, It can convert a normal text message to MMS. 

  • iMessaging 

Your number may be registered as an iMessaging number even after switching from iPhone to Android. Please get in touch with Apple representatives to resolve this issue. 

  • Reset your phone 

It is generally a last resort if all the fixes mentioned above fail. Hold down the power button on your phone until it restarts. If your phone has a removable battery, try removing it and putting it back in. If you cannot remove the battery, please remove the SIM card from the designated tray and insert it again. 

Use Cases

Message blocking is an active bug in Gmail.

This issue affects text messaging services and can also extend to other means of communication, such as Gmail. An error can appear for many different reasons. Some of them are: 

  • Entering an incorrect email address
  • Incorrectly typing a period at the end of the email ID. 
  • Typo in the email (e.g., spaces between)
  • Spam is sent continuously. 

Steps to solve 

  • Check that the email address entered is correct. Avoid adding a period at the end of the email address.
  • The Google algorithm can notice the collection of personal data via spam mail. It can mark you as malware and thus activate message blocking.
  • Use Google Groups to send a message to a large number of people. 
  • If all the fixes don’t work, you may need to get help from the hotline.

Message blocking is the active message in Google Hangouts. 

Google Hangouts is the default messenger for most if not all, Google phones. You can send a Hangout message or a standard SMS message, but the only condition is that the recipient’s number is associated with their Gmail account. 

If you’re experiencing difficulties, try some of the basic troubleshooting steps we mentioned earlier. Check that Cellular reception is adequate and that Wi-Fi is working properly.  If both of these steps don’t work, try signing out of the Hangouts app and signing back in again. 

Logging out of the phone is a simple procedure. All you need to do is open Meetings and go to the menu bar in the top left corner of the screen. Now click on Settings, go to your Google Account, and tap on Sign out. Sign in to the app again by tapping Sign in after reopening the app. Ensure to verify your phone number and turn on the option to find you in Hangouts via contacts. 

Free message blocking is an active notification on T-Mobile. 

Out of all the service providers, T-Mobile users appear to be the worst hits. They can see the message lock as an active message or a prompt for action on the screen if the device has not been updated. It can also happen if you unknowingly exceed the character limit. 

Solutions for blocking messages on T-Mobile devices

For Android phones with Android

  • Clear all cached data from the Instant Messaging app
  • Check that you entered the recipient’s contact number correctly. 
  • Try uninstalling and then reinstalling the messaging app loaded on your device.
  • Restore default settings for Access Point Name (APN)

For Apple phones

  • Restore Network Settings to the original settings.
  • Update your phone to the latest released version. 
  • Check if it’s a network problem by removing your SIM card and plugging it into another device. 

If none of those mentioned above fixes work on your Android / Apple device, please try to contact 

Message blocking is an active bug in iMessaging

Like Hangouts as the default messaging app on all Google phones, iMessaging is the default messaging service on all Apple devices. Texts can be sent via the classic SMS platform if the recipient is not a registered iMessaging user or if you have accidentally turned off iMessaging services. 

If iMessaging isn’t working properly, consider resetting Network Settings. It will not affect your data in any way, but it will delete previously used Wi-Fi networks and APNs. 

There’s also a chance you’ve missed any updates, so check it out by navigating to the Software Updates page on Settings. If all of these steps still don’t restore messaging services, a factory reset may be your only way out.  The steps for a successful backup and restore may vary by device, but the basic steps remain the same. 

Backing up and restoring on iPhone 

  • Click on Settings on your home page.
  • Go to General Settings – it may take a little scrolling. 
  • Swipe down until you find Reset. 
  • Click on Delete All Content and Settings 
  • Back up your files and data – via- iCloud
  • Click on Delete Now – Then, you can see a popup dialog. It will lead you to the first layer of security checks.
  • Enter your password and click Erase iPhone.
  • Re-enter your Apple ID and Confirm – then a second dialog box appears. The restart procedure should start shortly after entering the security details.

Note that a factory reset will erase all your data from your device, including documents, third-party apps, music, and accounts. However, all data that has been uploaded to iCloud will be available for download. Factory reset is the best way to erase all local data stored on your device. 

Message blocking is an active bug with Lycamobile. 

It seems that not only T-Mobile users have this problem. Lycamobile users have also reported a problem with active message blocking. As we discussed earlier, you can see a popup notification if your plans have expired prematurely or you forgot to charge your phone. 

Steps to resolve the error 

  • Users have noticed that disabling WiFi has resolved the problem, and messages seem to wake up again.
  • Try removing the Lycamobile SIM card from the phone and placing it on another device. It should fix the problem if it were related to the SIM card in particular.
  • Check that your Lycamobile text messaging service is set to the latest Lycamobile message center. You can check this by going to the Settings page and then head over to Send Profiles. Contact their toll-free number for more information on the message center in case it has yet to be updated.
  • The easiest solution is to purchase a plan from their website. Plans start as low as $19

How do we fix message blocking is active on Metro computers? 

One of the most common reasons message blocking is active on Metro PCs is that your plan does not include international calls (calls to the US, Canada, UK, or Australia). In these cases, updating your plan should help. 

  • If the problem is with the SIM card, removing it and placing it on another device shouldn’t matter. The only option may be to reset the network completely.
  • Check that your recipient is up to date with bill payments. Your message may not be received even if you did everything right.
  • Contact the nearest Metro PC information center and ask for a new batch of smartphones or SIM cards. You can see that this solves the problem for a large number of users.

Basic troubleshooting steps:

  1. Restart your device.
  2. Turn off WiFi to make sure you’re using your device network.
  3. Check whether the number you’re messaging is on the device Block or Spam List. If it is, you won’t be able to text to that number.
  4. Update the time and date on your device and enable auto-update.
  5. Uninstall any downloaded messaging apps.
  6. Contact your carrier and ask them to guide you to make sure the short message service center (SMSC) setting is accurate.
  7. (Android only): Clear the messaging app cache a & b steps is a guess, not knowing what device is having the trouble. Check your device settings for device maintenance or device care.
    1. App cache: Choose Email & Messaging > Manage messages.
    2. SMSC setting: Choose Apps & Accessories > Manage apps.
  8. (Apple only)Check the following: Is the text being sent through iMessage? If so, see iMessage Help instead. If you or your contact had an iPhone and switched recently, turn off or unregister iMessage & FaceTime. iPhones continue sending via iMessage until it’s turned off, so you’ll miss these texts if your phone doesn’t have iMessage. For more information, see If you can’t receive text messages from an iPhone – Apple Support.
  9. Update your device software to the latest version.
  10. Delete texts and text threads. You can back these up beforehand using apps from the app store.
  11. If available, try texting the same number using another device or other means other than your cell phone. This test will help determine if the person on the receiving end of the text has turned on a feature returning blocking active.

Message Blocking Is Active

Advance Steps

  • Check your device’s Message-blocking feature and or parent controls or carrier allowances that may be preventing texting on your end or your recipient’s.
  • Check your device to make sure it shows at least two signal bars, and you can send a text to yourself. Signal issues or no service may be the cause.
  • Check to ensure your device has at least 15% free space. You can delete apps, photos, or songs you no longer want to free up space (be sure to backup 1st).
  • Storage clearing: plug in your device to a computer, go to your device’s internal server, and use the computer OS search option. type *.jpg & *.PNG. Select all, copy and paste it into a folder on your computer. Return, select all, and delete. (be sure to back up)
  • Tip: Your devices may have years of SMS photo archives as far back as your very first phone.
  • Tip: Text messages are limited to approx 160 characters. (subject to carrier) If a message exceeds, for example, 160 characters, it’s automatically converted to a picture message (MMS).
  • Other: For prepaid accounts, you have an account balance to ensure the account is not causing the problem.

Message Blocking Is Active – What It Means And How To Fix 2024

It means that a person has all text messaging blocked by their carrier and can’t send or receive any text messages. … If it is – be certain the person you are texting has their phone settings enabled to send and receive text messages.

How do I know if someone blocked me from text messaging on their phone?

If you don’t get replies from whoever you’re texting, it doesn’t mean they blocked you. First, look for the delivered text right below your message:

If that appears, then chances are your friend or whoever you’ve been messaging is not near their phone or doing something else. If they blocked you, then your phone knows not to carry the text, so you will not see that delivered.

Now, if you are texting with someone on an Android device while you have an iPhone or vice versa, the messages are called SMS messages, and as well as the messages themselves, the send button will also be green:

If you’re sending an SMS Message, it will take significantly longer for the message to be delivered, so don’t count on it delivering immediately. If it takes a while to deliver, there’s just a lot of traffic between iOS and Android phones sending text messages to each other.

However, if you see the error sending a message and you have all of the following:

  • Adequate WiFi
  • Data at three bars or more
  • Your friend has adequate WiFi
  • You know they have good data

Then, they may have blocked you. Don’t fret. However, this chance is slim compared to the chances of the other possibilities. When you see this:

Or this:

Then, you may have been blocked. However, here are some other things that may have happened:

  • You sent a text to the wrong number.
  • You do not have service.
  • Not connected to WiFi.
  • Your friend is not connected to WiFi.
  • Your friend does not have access to data.
  • You are attempting to text an Android user or vice versa.
  • Your phone is outdated (at this moment, iOS 8 or below doesn’t have enough support to text other devices)

Hopefully, you will find your solution. Remember, it’s very rare for someone to block you out of the blue unless you’ve been considerably unkind to them.

Reverse phone lookup


Even with the advent of other popular messaging services, many users still rely on the good old text messaging services for communication. So, it is naturally frustrating that notification message blocking is active when you are trying to send a text message. 

There could be many reasons for this particular notification appearing. Your network may need to be stronger, or you may need more account balance to send the message. 

Another reason for not receiving the text message may be that the recipient may have blocked your number. You can call the person to see if they’ve blocked you. 

In some cases, you are not to blame. No shortcodes from your service provider may be causing the problem. In such cases, please get in touch with your sales representative. Remember, whatever the root cause of the problem is, there is always a workaround. 

Part 1: What Does It Mean When You Get a Message That Blocking Is Active? When you receive the message blocking is a dynamic error, it means that the number you are trying to text has been blocked somehow. It could be that they are on your block list or that you have some parental control set up.

Can I see text messages from someone I blocked?

Any message sent while you had them blocked is gone, and when you unblock them, you only get new messages that are sent after they have been unblocked.

So, if you want to ignore someone for a week, put their contact information on silent; that way, you won’t hear they have sent a text. And then you can greedily read everything they send. Otherwise, you are playing that stupid Block Unblock game that most people are playing but wish they could see the begging and pleading to text or call them. (At least, that is what they hope is happening while blocking people.)

If I have gotten to the point of needing to block someone, I delete them from my contacts, and their message never reaches me after that point because, for me, if their number is not in my contacts, I don’t get the texts or the calls. Out of sight, out of mind (aka dead to me).

I have tried texting my boyfriend, and every time I try texting and sending him a text message, it says, “Unable to receive message blocking is active.”?

No, girl, it doesn’t mean he blocked you. So don’t pay attention to these RUDE ASS PEOPLE. They don’t seem to care, especially how their answers came across. Something could be wrong with the network, especially T-Mobile and Metro PCs. So keep trying; I am sure he won’t block you out of the blue.

What does it mean when I text someone and receive a message saying message blocking is active? It sounds like the person you sent the message to blocked you.

What does it mean when I get a message saying, “Free Msg: Unable to send a message – Message Blocking is active”? How do I remove it? Seriously, in my personal

experience, it means that I forgot to pay my phone bill. Hey, it happens to the best & the worst of us, but it’s not the end of the world.

What does SMS mean when I send a text? Does it mean I’m blocked?

SMS is the Simple Message Service. If you see this, you know the simple, original service sent your message for text messages. SMS is limited to 144 characters and no images. Think early, Twitter.

If your text is over 144 characters, SMS will split it into short chunks. MMS, the Multimedia Message Service, does more. It carries longer messages, images, and even short videos.

How do I know when someone has blocked my text messages?

Generally, you won’t know if someone has blocked SMS messages. The message will be sent as usual, and the recipient’s phone will receive it, but they won’t get a notification, and it won’t show up with their other messages (most phones store messages from blocked contacts in a separate folder).

If you have an iPhone and you iMessage someone who has blocked you, typically the iMessage will fail, and your phone will resend the message as an SMS message. A failed iMessage that resends as an SMS is a good sign you’ve been blocked.

You could also call the contact in question. Typically, a blocked contact’s call is sent to VM after one ring. So if you keep getting VM after one ring, that’s also a good sign that you’ve been blocked.

Message Blocking Is Active

Read More:Goga Jahar Peer Sadhana Method and Rules, Mantra, Worship Method

Leave a Reply

Your email address will not be published. Required fields are marked *